• Wire Cutting & Stripping machine Model No. HSE-141



    stripping-machine-HSE-141

    ∗ Machine for 2 wires at a time, of upto1.5 mm2
    ∗ High Speed machine
    ∗ Upto 2 mid-marking (for middle strippings) possible
    ∗ Machine and Controls in a single housing

    Salient Feature :-

    ∗ Machine controlled with PLC.
    ∗ Touch panel display having easy to use graphic interface
    ∗ Fully automatic machine. Setting is completely digitized and mostly automatic.
    ∗ Machines for both side stripping.
        (Can also do single side stripping and also only cutting).

    ∗ "MICROPROCESSOR controlled machines with smart display.
    ∗ Fully automatic machine. Setting is completely digitized and mostly automatic.
    ∗ Compressor not required, Silent operation.

    Performance Range

    Wire Cross section Model HSE-141 : 0.2 to 1.5 mm2, (Contact us for sizes outside this range)
    Length Selection Standard range: 50 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 9 meters
    Accuracy +/- 0.2% (min. +/-1.5 mm)
    End Stripping Upto 15 mm at both ends (subject to material friction) Partial as well as Complete stripping possible
    Middle Stripping Upto 2 windows marking. (Conditions apply, In select models only)
    Multiple Wire Processing Can process 2 wires at a time for Wires upto 1.5 Sq.mm. For rigid wires, the machine may get de-rated.
    Wire Types Single core with single or multiple strands / Flexible or rigid
    Max. Outside Diameter 4 mm
    Changeover setting time 30 sec typically.

    Technical Data

    Machine Housing Machine housed in “Industrial” sheet steel fabrication.
    Mechanical system Rugged machine with precision mechanical system
    Electronic system PLC and drives
    Wire feed system 2 motors with 4 feed rollers, variable speed
    Cutting & Stripping system Directly by Stepper / Servo motor control
    Power 220V / 50 Hz, other options upon request
    Compressed air 5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp)
    Machine size Table top machine

    Production Speed* :

    Style 100 mm 300 mm
    Cutting and both Side stripping 3000 / hr (5700 / hr) 2500 / hr (4800 / hr)

    ∗ Speed for 0.5 sq mm multi-strand wires.
    ∗ Speeds mentioned in bracket are with two wires at a time.

    Attachments : Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)

    Voltage Servo-stabilizer (2 KVA) or CVT (1 KVA) is must, to be arranged by you. Proper earthing is essential.