• Automatic Cutting machine for Corrugated Tubes: CTO Corr



    cutting-machines-CTO16

    M/s ‘Machine maker r.s.’ have developed and manufactured Cutting machine for Corrugated tubes. It is useful for pre-slit as well as un-slit PVC corrugated tubes.

    The machine uses a specially developed unique cutting mechanism and belt feeding system. Both these ensure that the hollow tubes do not collapse during feeding or cutting.

    This machine is tabletop, user-friendly, and automatic. It is available with Microprocessor controls. A simple and smart keypad and display is used for setting the length, target quantity, batch qty etc. It comes with in-built production counter, which indicates the number of cuts taken.

    The standard machines can cut corrugated tubes from 5mm diameter to 32 mm dia.

    It can cut around 2000 tubes of 100 mm length per hour.

    The machine cuts tubes within 2mm accuracy and gives a good cut.

    The machine works on single phase electric supply and 5 bar pneumatic supply.

    Performance Range

    Tube Type Corrugated Tubes: from 5mm dia to 32 mm dia.
    Length Selection Standard range: 5 mm to 9 meters, in steps of 1mm; You will have to ensure knot-free supply of tube to machine.
    Accuracy +/- 0.3% (min. +/-2 mm)
    Changeover setting time 4 minutes typically.

    Technical Data

    Mechanical system Rugged machine with precision mechanical system
    Electronic system Separate electronic control With PLC and drives
    Tube feed system 1 stepping motor with 2 feed belts, variable speed
    Cutting system Pneumatic Cylinder and Solenoid Valve With Simple cutter. Uses standard blade available in stationery shops
    Length Measurement system Directly by stepping motor control
    Power 220V / 50 Hz, other options upon request
    Compressed air 5 to 6 bar, 25 lpm (0.5 hp compressor)
    Dimensions 450mm X 450mm X 435mm(h), approx

    Production Speed* :

    Length 100 mm 500 mm 1000 mm
    Output 2000 / Hr 1200 / Hr 1000 / Hr

    Speed for 5 mm Corr-tube

    Voltage servo-stabilizer (2KVA) or CVT (1KVA) is must. Proper earthing is essential.