• High Speed Wire Cutting, Stripping & Twisting machine ‘RAE-Ser-1’ + T


    ∗ This is basically a RAE-Ser-1 machine with twisting attachment.
    ∗ Machine for twisting of PVC insulated copper wires (0.3 sq. mm to 1.5 Sq. mm)
    ∗ Can twist on single or both sides.
    ∗ Twist length upto 9 mm
    ∗ Performance is dependent on the tightness of PVC insulation on copper and
        general quality of wire.
    ∗ Upto 2 wires can be processed simultaneously.

    Salient Feature :-

    ∗ Machine controlled with PLC.
    ∗ Touch panel display having easy to use graphic interface
    ∗ Fully automatic machine. Setting is completely digitized and mostly automatic.
    ∗ Machines for both side stripping.
        (Can also do single side stripping and also only cutting).
    ∗ Machine can be used for only cutting & Stripping only for normal round wires.
        (PVC insulated copper wires of upto 6 sq. mm)

    Performance Range

    Wire Cross Section 0.5 to 1.5 mm2 for twisting. 0.5 to 6 mm2 for cutting & stripping (Contact us for sizes outside this range)
    Length Selection Standard range: 70 mm to 9 meters, in steps of 1mm; Range can be extended to get 20mm to 25 meters
    Accuracy +/- 0.2% (min. +/-1.5 mm)
    End Stripping & twisting Between 3 to 9 mm
    Multiple Wire Processing Can process 2 wires at a time
    Wire Types Single core with multiple strands.
    Max. Outside Diameter 2.5 mm for slitting, 6 mm for cutting stripping
    Changeover setting time 3 to 5 min. typically.

    Technical Data

    Machine Housing Machine housed in “Industrial” frame with Aluminium Profiles. A separate attachment for twisting.
    Mechanical system Rugged machine with precision mechanical system. Twisting unit fitted to main machine
    Electronic system PLC and drives
    Wire feed system  2 Servo motors with 4 feed rollers, variable speed
    Cutting & Stripping system V blade pair with Servo motor, variable speed and PLC controlled strokes
    Twisting System One Servo Motor with too & fro oscillating motion
    Length Measurement system Directly by Servo motor control
    Power 220V / 50 Hz, other options upon request
    Compressed air 5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp)
    Dimensions 500mm X 620mm X 335mm (h)

    Production Speed :

    * Processing speed between 3000 to 4500 wires per hour (with two wires at a time    processed simultaneously. Speed between 1500 to 2300 with one wire

    Voltage Servo-stabilizer (2 KVA) or CVT (1 KVA) is must, to be arranged by you. Proper earthing is essential.